Bellari

Bellari
Website link
Visit the     Website

Classically designed vacuum tube and solid state phono preamps, made in the USA.

Bellari takes their tube based equipment very seriously. They have removed the high cost of point to point wiring and inefficient construction techniques and left the pure analog musical sound that class “A” tubes can offer. When it comes to sound Bellari is one of those rare values that comes from a perfect blend of function and design. In only seven years Bellari became a major force in digital recording front ends as well as performing musicians.


 

VP130 Tube Phone Pre and Headphone Amplifier

Now you can record all your old records onto your computer, then to CD with the VP130 that connects to your turntable. The VP130 provides not only the required RIAA equalization to properly re-equalize the material from the record, it does so utilizing the naturally warming and musical characteristics of tube circuitry. The VP130 features a completely independent headphone output.

- All Tube Circuitry
- RIAA Equalization
- Seperate Headphone and Stereo Line Outputs
- Individual Output Level Controls
- Rumble Filter
- Mute Switch

Stereophile Class "B" rated phono stage

Documentation


Download the VP130 user guide
Download the Bellari datasheet

Specifications

  • I/ O Connectors: RCA, 1/4" TRS Stereo
  • Input Sensitivity: 30 dB gain @ 1kHz, 47k ohms Input Z
  • Input Impedance: 50k ohms
  • Output Impedance: 8 ohms Headphone, 100 ohms RCA
  • Max Output Level: >10dB @ 1kHz at at .1% dist.
  • Equalization: RIAA +/- 1.5 dB, 20Hz to 20kHz
  • Rumble Filter: 20Hz
  • THD: .02% @ 1KHz
  • S/N Ratio: >80 dB unweighted
  • PWR: 15 DC
  • Indicator: 1 Power LED
  • Size: 6"w x 2.5"h x 5.4"d
  • Weight: 2 lb

 
 

  • VP530
  • VP530 Tube Phono Preamp USB

    The VP530 is designed to amplify an RIAA equalized phono signal to a Hi-Fi level signal, and is intended for magnetic pickups. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musical than solid state preamplifiers.

    - All Tube Circuitry
    - RIAA Equalization
    - Headphone / Stereo Line Output
    - Individual Output Level Controls
    - Rumble Filter
    - Mute Switch
    - USB output

    Documentation

    VP530 Tube Phono Preamp user guide.

    Specifications

    • I/O Connectors: RCA, 1/4" TRS Stereo, USB
    • Input Sensitivity: 30 dB gain @ 1kHz, 47k ohms Input Z
    • Input Impedance: 50k ohms
    • Output Impedance: 8 ohms Headphone, 100 ohms RCA
    • Max Output Level: >10dB @ 1kHz at at .1% dist.
    • Equalization: RIAA +/- 1.5 dB, 20Hz to 20kHz
    • Rumble Filter: 20Hz
    • THD: .02% @ 1KHz
    • S/N Ratio: >80 dB unweighted
    • Indicator: 1 Power LED
    • Size: 6"w x 2.5"h x 5.4"d
    • Weight: 2 lb

     
     

  • HA540
  • HA540 Headphone Amplifier

    The Bellari HA540 is a pure 'Class A' stereo audiophile grade headphone amplifier. The all class A signal path ensures smooth clean analog audio. The 0 (zero) feedback design means smooth natural analog response.

    It features 2 input paths and high gain for MP3 players, ipod, etc and a low gain path from audio selectors, mixers, satellite receivers, etc. It also features direct into the tube grid coupling for no loss or distortion. The unit is included with a universal power supply for use most anywhere in the world.

    - Over 200 volts plate voltage
    - 2 Switchable input channels
    - Output jacks for both 1/4 and 3.5mm connectors
    - Both 3.5mm and gold RCA input jacks

    Youtube video review - Oct 2010

    Documentation

    HA540 Headphone Amp user guideHA540 Headphone Amp manual

    Specifications

    • Input Impedance: 47k ohms
    • Output Impedance: 16 ohms
    • Max Output Level: +15dBv @ 1kHz at .1% dist.
    • THD: .05% @ 1KHz
    • S/N Ratio: >80 dB unweighted
    • Indicator: 1 Power LED
    • Max Output Power: up to 500 mW/side, 1 W/Stereo ( @ 16 Ohms )
    • Frequency Response: 5 Hz - 30 kHz
    • Phase Shift (In to Out): 0 db
    • Crosstalk: - 75 dB
    • Headphone impedance: 16 Ohms to 2000 Ohms
    • Max Input Level: +15 dBV
    • Input Connectors: LOW: RCA, 1/8" (3.5mm)Stereo; HIGH: RCA
    • Outputs:
      1: 1/4" TRS Stereo jack
      1: 1/8" (3.5 mm) TRS Stereo jack
    • Power: 15 VDC - 700mA
    • Size: 6"w x 2.5"h x 5.4"d
    • Weight: 2 lb.

     
     

  • MP507
  • MP507 Tube Mic Preamp

    The MP507 is a single channel preamp that utilizes a single 12ax7 vacuum tube. It has a MU-Metal audio transformer to decrease noise and enhance the sound quality of the XLR input. The design of the MP507 utilizes a high speed self regulated switching power supply to generate 230V of clean usable plate voltage for the 12ax7 vacuum tube. The result is a clean and powerful sounding tube preamp.

    The MP507 amplifies your microphone signal to a professional line level. That signal may then be sent to a digital recorder, mixing console, or signal processor.

    - Real 230V tube plate voltage
    - Internal high speed self regulating switching power supply
    - MU metal shielded input audio transformer
    - 48V of clean, quiet phantom power

    Documentation

    MP507 Tube Mic Preamp user guide.

    Specifications

    • Input Impedance: XLR: 600 Ω (Transformer balanced)--- 1/4”: 1m Ω
    • Output Impedance: XLR: 100 Ω --- 1/4”:100 Ω
    • THD: .15%
    • S/N Ratio: >110 dB
    • Maximum Input Level: -30 dB mic +4 line XLR, -10 dB 1/4”
    • Maximum Output Level: +16 dB XLR, +10 dB 1/4”
    • Pad: - 37 dB
    • Frequency Response: 20 - 25kHz +/-3 dB
    • Dimensions: 3” X 5.5” X 6”
    • Weight: 1.6 lbs.
    • Power: 15 VDC

     
     

  • BACK TO VP130

  • IMPORTANT: Products and specifications are subject to change without notice.